How do I vacuum my above ground pool with a sand filter?

You’ll need to take the filter out of the pool (it’s best to do this when no one is in the water). Remove the filter basket and place it over the drain. Once the filter basket is over the drain, attach a hose to the filter basket and attach the hose to a pump. Set the water level to where the water level is lower than the top of the filter screen.

How to vacuum above ground pool with sand filter?

To ensure that the sand filter stays clean, you will need to “suck” the pool water through the filter by vacuuming. Most sand filters come with a hose that is long enough for the pool. You will need to place the suction hose over or under the pool water. If the hose is small, lay it on the edge of the pool.

How to vacuum your above ground pool with a sand filter?

Since everything that goes into your filter, including sand, should be kept as free-flowing as possible, it’s important to make sure you have a quality filter and a powerful vacuum. After all, it’s not a good idea to put more sand than necessary in your filter, and a strong vacuum will help to ensure that you don’t end up with a clogged filter.

How to vacuum an above ground pool with sand filter?

You will need to start by laying down the filter bed and gravel, which will help to support the filter media when it’s in place. Once you have this in place, you will want to vacuum the filter bag to remove any dust or other gunk that may have gathered on the filter material. When you’re finished, you will want to secure the filter bag to the filter bed, and plug the filter in. Finally, you will want to connect your pool pump to the

How to vacuum my above ground pool with sand filter?

Vacuum your pool with the above ground pool vacuum. The vacuum is a hose that connects to your pool’s inlet and outlet. It is usually attached using a hose clamp. Once the hose is securely connected, turn the vacuum on. Always keep the hose pointed away from pets and children. It is a common misconception that backing up the hose will help clean the filter. This is not true! The hose will pull in dirt and debris and clog the filter. Always move the hose around