How do you frame a window in an existing wall?

If you have an existing wall — whether it’s brick, stone, wood, or even drywall — then framing around the window can be a little trickier. You don’t want the finished product to look like a piece of your home is floating in the middle of a large hole. That said, you can still get a great look by following a few simple steps.

How to frame a window in drywall?

There are two types of framing options for drywall windows: flush-mounted and hung. Flush-mounted windows fit into the wall studs and have the drywall attached directly to the framing. Hung windows use an expansion joint or so-called “flap” in the drywall, allowing the window to fit over the existing studs. Both methods of framing windows in drywall offer pros and cons. Flush-mounted windows require less drywall to be cut out, so

How to frame a window in an existing wall?

The first step is to determine the size of the window that you want to replace. This can be a challenge if you don’t have measurements handy. But you can use the existing window as a guide. For example, you can measure the distance between the sills and the floor and then use that as a starting point. Or, if you have moldings around the windows, use the moldings as a guide to the window’s size. If you don’t have

How to frame a window in a wall without drywall?

In the case of a window framed into an existing wall without drywall, either the window or the wall framing must be able to accommodate the extra thickness of the drywall. Often, this means the window will be recessed, with the drywall covering the recess. This approach trades a small amount of floor space for the potential for a clean appearance, especially if the window’s trim and its surrounding wall surfaces match or complement each other well.

Frame a window in an existing brick wall?

When you have an existing brick wall you will have to cut some of the bricks out around the window opening to create enough space for the new window framing materials. You will need to cut the bricks to match the thickness of the new window framing. You can either cut the bricks with a masonry circular saw or a diamond stone saw. Be sure to wear protective gear and use safety equipment.