How much does a yard of dirt cover?

The amount of dirt needed to cover an area depends on the area itself. A suburban lot or a typical backyard will require a yard of dirt to cover it, while an area of a large lot or a mountain lot will require more. The size of the area also influences the amount of dirt needed. The larger the area you are trying to cover, the more dirt you will need.

How much does a yard of dirt cover in a basement?

A yard of dirt is approximately 4.2 square feet, so if you’re trying to cover an unfinished basement with a full yard of dirt, you’ll need a total area of about 4.2 x 5.5 feet, or 22.6 square feet of floor space. This amount of floor space will make a room that’s about two-thirds the size of a standard living room.

How much does a yard of dirt cover in a car?

A single yard of dirt will go about halfway in a standard vehicle. It will cover a small, four-door sedan from the top of the doors to the ground. If you have the right tooling, you could pack a yard of dirt into a larger vehicle, but it would be more difficult to move around.

How much does a yard of dirt cover in a hole?

A yard of dirt equals 43,325 cubic inches. If you are digging a hole that is four feet by four feet, that hole will be approximately 16 feet deep. So if your hole is four feet by four feet, a yard of dirt will cover the hole to a depth of 16 feet.

How much does a yard of dirt cover in the ground?

A yard of dirt is about the size of a sandbag and weighs about 62 pounds. If you cover an area the size of a tennis court with a yard of dirt, you’ll need about 1.3 cubic yards of dirt.