How much will 12 yards of gravel cover?
A 12 yard gravel layer is approximately 6 feet in length, 4 feet wide, and 10 inches deep. If you have a rectangular area to cover, it will take you about 16 loads of gravel, each load containing approximately 11 cubic yards of gravel, to complete the job. The amount of gravel you need depends on the size of your area, the density of the gravel you want, and the type of gravel you are using.
How much will yards of stone cover?
One cubic yard of gravel weighs about 62 pounds, which is about the weight of a full-grown adult. Therefore, you will need about 62 pounds of gravel to cover 12 yards. If you don’t have access to a truck you can rent, you could also use a small dump truck to haul the gravel or gravel and sand together, although you will be paying for two loads rather than one.
How long will yards of gravel cover?
In order to have a good-looking gravel pathway and to prevent gravel from washing off, you’ll want at least 12 inches of gravel over the top of the pathway. If you have a sloping pathway or a drainage issue, you’ll want to go a little higher. If you’re planning to add a gravel walk way in front of your house or in your yard, you’ll want to add another foot or two.
How much does yards of gravel cover?
On average, one cubic yard of gravel weighs about 65 to 75 pounds. If you need to cover an area that’s 50 feet long by 30 feet wide with 12 yards of gravel, a volume of about 43,500 cubic feet of gravel will be required. You’ll need somewhere around 300 yards of gravel to fill a 50-foot-long by 30-foot-wide area that’s six feet deep.
How much is a yard gravel driveway?
One yard of gravel will cover an area of about 40 feet by 30 feet. This is a large area, so you will need a lot of gravel to cover the entire driveway. Depending on the size of your gravel truck and whether you have a high-capacity hopper, you will need somewhere between 300 and 1,500 yards of gravel for a gravel driveway. In order to figure out how much gravel you will need, add the length of your driveway by multiplying the length of your driveway by the