How to adjust hunter PGP ultra sprinkler heads

How to adjust hunter PGP ultra sprinkler heads?

To adjust the hunter PGP ultra sprinkler head, first loosen the clamp nuts that hold the sprinkler head onto the threaded sprinkler pipe. Then, loosen the shank nut and lift it up off the sprinkler pipe. You’ll notice that the head will be able to move back and forth freely along the pipe. Now, you can use your hands to push the head down to the correct setting, and then tighten the shank nut.

How to adjust hunter PGP ultra sprinkler heads on stand?

To adjust the hunter PGP ultra sprinkler head on a stand, you will need to loosen the locknut on the sprinkler head and push the locknut forward slightly. This will allow you to move the sprinkler head up and down. Be careful not to lose the locknut and make sure it is properly tightened back up.

How to adjust hunter PGP ultra sprinkler heads on stand off?

The hunter PGP ultra sprinkler head has a unique design that allows for the sprinkler head to be adjusted on a stand-off. This unique design gives you the option to set the sprinkler head to whatever height you need to get water into your trees, grass and other landscape. The stand-off is located on the bottom of the sprinkler head and is adjustable using the hex nut on the sprinkler head. Tighten the hex nut until the sprinkler head is level with the ground

How to adjust hunter PGP ultra sprinkler heads off stand?

The hunter PGP ultra sprinkler heads come equipped with a stand. One way to make sure to get the right water pressure and even coverage is to make sure to adjust the sprinkler head off stand is properly. To do this, simply loosen the locking screw located on the sprinkler head's attachment device until it is able to turn freely. Once the sprinkler head is loose, slowly pull up on the sprinkler head while holding the collar down, aligning the two holes. Once aligned,

How to adjust hunter PGP ultra sprinkler

Once you have set the sprinkler head in the proper location and tilted it to the appropriate angle, you should lower the sprinkler until it is even with the ground. If the sprinkler is too high, it will throw water onto your lawn and possibly your house. If the sprinkler head is too low, it won’t provide adequate and even coverage. It’s best to have a friend or family member help you level the sprinkler with a stick. Once you have it