How to adjust hunter pro spray sprinkler heads distance?

There are two ways you can do this: you can turn the sprinkler head’s spin dial (or “dial”) counterclockwise to increase the distance or clockwise to decrease it. Or you can push or pull the sprinkler head outward or inward to change its distance. Make sure to only move the sprinkler head a few inches at a time.

How to adjust hunter pro spray head distance?

In order to figure out the correct distance between the hunter pro sprinkler heads and the animal, measure the width of the animal at the shoulder. For example, if your animal is a deer, measure the width of the deer at the shoulder. If you have a larger animal, such as a horse, measure the width from the shoulder to the hip. Then, subtract this number from the width of the sprinkler head. The resulting number is the minimum distance between the sprinkler head and the animal

How to adjust hunter pro spray sprinkler head spacing?

The length of your sprinkler head will determine how far the coverage will reach. The distance is adjusted by loosening the head lock nut and rotating the sprinkler head until it’s pointed in the direction you want. When finished, tighten the head lock nut. Before doing so, make sure you have set your sprinkler head at the maximum distance to prevent an overflow.

How to adjust hunter pro spray sprinkler head height?

Most of the hunter pro sprinkler heads come with adjustable height. That means you can change the sprinkler head height to your preference. These sprinkler head height adjustments are usually made by screwing your sprinkler head into the holder. Screwing the sprinkler head down increases the sprinkler head’s height while screwing the sprinkler head up decreases the height. There are also other sprinkler head height adjustments that are made by using a spanner wrench. Regardless of which type of sprink

How to adjust hunter pro spray sprinkler head distance?

If your hunter pro sprinkler head is not adjusted correctly, you could end up with a wet spot in your yard or a dry spot at the end of your yard. You need to make sure that when you pull the trigger, the water shoots out of the sprinkler head a good distance away from your home, the trees and everything else in your yard. If you are having problems with your sprinkler head’s distance, you should first check the sprinkler head’s adjustment.