How to apply stain to a fence with a roller?

You’ll need a high-quality water-based or oil-based polyurethane sealer, a foam brush, sanding and protective gloves, and a foam roller (if using a water-based sealer). Begin by sanding the fence to remove any rough spots. You may also want to sand the surface to a roughness level that matches the thickness of the stained wood. Let the wood dry and apply a coat of sealer from the foam brush. Let the seal

How to stain wood fence with stain?

To get a deep color, apply stain with a roller along the entire length of the fence If you have a circular saw, use it to cut the wood into strips that are about an inch wide. This will give the wood grain a consistent look and will make sanding the fence easier. You may want to sand the fence with a power sander before applying the stain if the wood is very rough. Just be careful not to sand so much that the wood begins to look chalky and spl

How to stain a wood fence with stain?

If you are looking for a quick way to refresh and restore the natural beauty of your wood fence, then wood stain is a great option. Allen’s Home Centers offers a number of options for wood fence stains, including oil-based stains, water-based stains, stains that are pigment-only, stains that are pre-colored, stains made for exterior wood and stains made for wood decking.

How to stain wood fence rails with wood stain?

The key to an even, stained fence is to apply the stain to the fence rails with a roller. If you have a pole rail fence or a board on board fence, you’ll want to apply the stain to the underside of the rails using a pole rail brush, or to the front and top of the rails with a board fence brush. Apply the stain with a light but even hand, and don’t over-saturate the wood. Using too much will result in

How to apply stain to a fence with stain applicator?

A roller is the most common tool used for applying stain to a fence. It's great because the consistency of the resulting finish is less than that of a brush, making it easier to control. But the downside is that you'll end up with what appears to be a splotchy uneven color. To even out the color on your fence, use the same technique you'd use for a wall when applying a stain with a brush: Drag the roller over the fence in short, even motions. D