How to bind a quilt with sewing machine?

While using your sewing machine to quilt, you will need to use an arm that is long enough to reach the edges of the quilt, and also one that allows you to pivot easily. Before you start stitching, make sure that you have already finished sewing the seams of the quilt. Using the right foot pedal, feed the quilt back onto the machine bed. If you are using a free-arm, make sure that you have adjusted it to the right length, so that it will

How to sew on binding with sewing machine?

sewing the quilt on is often the most challenging part of the quilt-making process. And, if you’ve never tried it before, sewing the quilt on correctly can also be intimidating. Fortunately, there are some great ways to learn how to sew a quilt on. One of the easiest ways is to use a method called gather stitching. If you want to learn how to sew a quilt on with a sewing machine, gathering is an excellent place to start. And

How to make binding with sewing machine?

It is quite easy to make a quilt binding with sewing machine. First, measure how long the quilt edge is. Add extra length so that your finished quilt will have a nice finished edge. Sew a line down the middle of the quilt edge, about ¼in from all the seams. Leave a length of about 3in. Now you can flip the quilt over and match up the raw edges. Pin the two pieces together so that the quilt edges are even. Sew

How to sew on binding on quilt with sewing machine?

The next thing to do is to lay your quilt out flat on a flat surface, such as a table or the floor. When your quilt is completely flat, lay the two end pieces together and line up the raw edges so that the sewn edges are even. Tape the two pieces together along the outside edge so the edges are flush. Now make sure the quilt is flat again and lay the middle section on top, lining up the raw edges as before. Tape the three sections together

How to sew on binding on quilt without sewing machine?

If you don’t have a sewing machine, you can still sew on a quilt binding by hand. However, this process is a little more challenging and requires your attention to detail. First, cut out strips of fabric that measure about 4–5 inches long. Fold these strips in half lengthwise and then in half again. You want to make sure that the two ends are flush with each other so that the quilt will lay flat. Use smocking pins or small clothespins to