How to bleed Harley brakes with abs?

Getting your Harley into the shop is the first step to resolving any brake issues, but the next step is to make sure you know how to properly bleed them. This is especially important with anti-lock brakes (ABS), as they require you to bleed the system differently. The most important thing to remember when bleeding Harley brake systems is that you only bleed pressurized brake lines. Brake fluid from the master cylinder will not flow through the bleeding system. If your bike has an ABS system, you

How to bleed Harley Davidson brake with ABS?

The harley Davidson brake system is designed differently from most motorcycle brake systems. The brake system has two reservoirs – one for the front wheel and one for the rear. A single master cylinder with two pistons is connected to each wheel. When you apply the brake, the hydraulic fluid flows into the master cylinder and is then sent to each wheel. The most distinguishing feature of Harley Davidson brake systems is the way they use the ABS. The motorcycle maker has built the system to be “bleeding aware

How to bleed Harley brakes with ABS?

First, turn off the bike. To ensure you have the correct bleed, use the color code matching the color of the bleeder screw on your front brake caliper. You can also confirm the presence of ABS by turning the ignition to the off position. Running the bike without the brake on while applying the brake lever, or trying to gently back the bike while applying the brake, can lead to a bad bleed.

How to bleed Harley Davidson brakes with abs?

There are three primary ways to bleed your Harley-Davidson brakes with ABS. One is the traditional squeeze and release method, which involves applying slight pressure to the bleed screw while releasing the brake pedal. If the brake pedal remains depressed or sinks a little, you have air in the system. If the brake pedal does not return to normal, there is likely air in the system. This is a common issue that can be resolved with a quick bleed. The second method is the press and turn method.

How to bleed Harley Davidson motorcycle brake with abs?

The Harley Davidson motorcycle brake with abs is actually pretty easy to bleed. To do it, you will need a bucket of water, brake fluid, a bleed screwdriver, a fine point drill (or other similar tool), and a compressor (or shop vacuum) if you don’t have one. First, remove the brake fluid reservoir cap and loosen the bleed screw. When the brake lever is pulled all the way back, you should see the brake pad. Using the bleed screwdriver, slowly