How to caulk trim and baseboards?

Use a wet-cement caulk for wood trim and a Silicone caulk for plastic or metal trim. Silicone caulk is a good choice for plastic and metal because it’s UV-resistant and flexible and will create a better seal. Wet-cement caulk will work on wood but will take longer to harden.

How to caulk baseboards?

The most common type of caulk used for baseboards is silicone caulk. Silicone caulk is a single-component caulk that hardens when cured by exposure to air. Silicone caulk is a great option for sealing around the edges of baseboards because it’s flexible and can conform to the shape of the board. It also comes in several colors and can match the color of your home’s exterior. For the best results, apply a thin layer of caulk

How to caulk around corners?

If you have a corner where two walls meet, you'll need to use a corner caulk gun to seal the joint. If you don't have access to a corner caulk gun, you can use caulk on each wall and use a small plastic or metal corner caulk to mold the corner. Be sure to apply plenty of caulk to the corners.

How to caulk trim around door openings?

Door casings and moldings are fantastic for giving a home its distinctive look, but they can also be a source of moisture when it’s humid outside. When warm, moist air is introduced around doors, it can cause water to condense on the casings and moldings, which can lead to warping, staining, and corrosion. To prevent this, you can apply a thin coat of caulk around the door casings and moldings. Use a caulk gun or a

How to caulk trim and baseboard corners?

One of the easiest ways to make sure corners are sealed properly is to use caulk and a caulk gun. When you get to corners, use a small amount of caulk and squeeze it into the corners. You don’t want your caulk to be too thick as this can be difficult to sand down later. Once your corners are dry, sand them down using sand paper. Make sure you don’t remove too much of the caulk since it will be visible after sand