How to change oil on Honda Accord 2008?

To check the oil level, put your car on a level surface with the oil dip stick in the fill tube. Push the dip stick back and forth until the oil level on the dip stick is even with the “fill line.” If the mark on the dip stick is even with the car’s oil level, your car needs an oil change. However, if you have more than the mark showing, your car’s oil needs to be drained. When the car is

How to change oil on Honda accord ES manual?

In order to change the oil on Honda accord 2008, you will need many tools. A few of them are as follows: A torque wrench, a screwdriver, a bucket, a strainer, a hose, a funnel, a funnel with strainer, a drain plug, a hose clamp, and a quality oil filter. You should also have some oil (5-10 quarts). If you are doing this for the first time, buy some oil that is thicker than the one that came

How to change oil on Honda accord ?

If you want to change oil on Honda accord you need to know a few things. First, you will need a wrench set for removing the oil filter. It is very important to use the correct size. Use a 7mm wrench for the oil filter removal and a 20mm wrench for the oil drain plug removal. You should lubricate the oil drain plug before removing it. After that, take the oil filter out and put it in a container. Once you have finished draining the oil, recirc

How to change oil on Honda accord ES manual transmission?

You should check the manual to see if you need to use a different oil if you have an ES manual or other transaxle. If you are using an ES manual transmission, you'll want to use 10W30 oil. If your car came with a 5W30 oil, it will not work properly in your manual trans. The 5W30 oil is designed for conventional automatic transmissions, so it will not work properly in an ES or any other manual transmission. If you want to use your

How to change oil on Honda accord ES?

If you have the Honda Accord ES, it has a manual oil change system. This system is similar to the one on the Honda Accord LX model. The difference is that the ES has a sensor that monitors the oil level inside the oil tank. It signals the engine when there is not enough oil, so you can add oil before the oil sensor triggers. The ES is designed this way to prevent the engine from being damaged when drained. It will only drain the oil when the engine is running.