How to change tub drain assembly?

First, snap off the drain cover. Remove the plug gasket and drain. Be careful not to lose any small pieces. You can snap the drain pipe off the drain opening. If the old drain pipe is rusted, the best way to remove it is to turn it. After you have removed the drain pipe, you will need to replace it with a compatible PTFE drain gasket, or a compression gasket. Replacing an old drain gasket is very easy, although the new

How to change tub drain assembly myself?

If you are handy, there are some tub drain assemblies that you can do on your own. If the tub drain is clogged with hair, grease, soap scum, or other debris you can try plunging the drain in a bucket of boiling water. If your tub drain is corroded, a drain auger may be the best option to clean it out. However, if your tub drain is overly worn out and needs to be replaced, you may want to call a professional.

How to change tub drain assembly fast?

If the tub drain is going to be more costly to replace, then it is important to understand how much it will cost to replace it and when you should do the replacement. The cost of a tub drain depends on the type of drain you have and how difficult it is to replace. For example, a tub drain that is difficult to remove is usually more expensive to replace due to the extra labor involved. If you are unsure if you want to replace the tub drain, then it is best to do

How to change tub drain assembly without removing it?

You can easily change your tub drain without removing it if you have a PEX or compression drain system. These types of drains have a sealed cartridge or tube inside the drain pipe that can be replaced without removing the pipes. To do this, turn the water off at the source. You should be able to hear the water flowing through the drain. Then, turn the water back on. If you don’t hear the water, check the drain and make sure it’s not completely cl

How to change tub drain assembly yourself?

To change tub drain assemblies yourself, you will need some special tools: a wrench that goes over the drain flange nuts, a plumber’s snake (or other specialized drain auger), a bucket, and some towels. You need to hold the flange nuts in place with the wrench while you feed the drain auger through the drain. As you feed the auger in, it should scrape out any gunk that has built up around the drain pipe. Continue to feed the aug