How to change tub drain flange?

Firstly, loosen the drain flange nuts. Screw a wrench into the drain flange nuts one by one. If you have a tub drain flange with screws, turn them counterclockwise and push them out of the drain hole. If you have a tub drain flange with snap lock, apply pliers to the drain flange nuts and loosen them, then pull the nuts off. If you’re using a wrench, apply some lubricant to it, and turn it slowly, w

How to remove tub drain flange?

If the flange is rusted and hard to remove, you may need to heat up your tub drain to loosen the seal. Heat the water in the drain to between 180 and 190 degrees and let it sit for about 15 minutes. Turn the water off and, once the water is drained, try to remove the flange. If you still have difficulty removing the flange, use a small flathead screwdriver to gently pop it off. If you have a section of the flange that is

How to install tub drain flange?

The tub drain flange is attached to the tub drain pipe with a rubber gasket. Make sure the gasket is properly positioned and tightly sealed to the drain pipe. If it is loose, then it will leak and cause water to back up. Screw the tub drain flange onto the drain pipe so that the threads are tight. Tighten the tub drain flange with a hex wrench. You can buy a drain flange gasket from a hardware store or install a pre-made gasket

How to replace tub drain flange?

To remove the corroded tub drain flange, first loosen the screws that attach it to the drain pipe. Then, remove the screw that connects the flange to the drain pipe. After that, pull the flange away from the drain pipe to release the sealant. When the sealant begins to loosen, push the flange back over the drain pipe. If the flange becomes dislodged, loosen the two screws that secure the flange to the drain pipe.

How to repair tub drain flange?

If the flange is corroded, damaged or loose, it will need to be replaced. Typically, tub drain flange replacement is a DIY project, but you might need the help of a professional plumber to complete the job safely and efficiently. You can either go to a hardware store or do the job online. There are many videos online that can guide you through the replacement process. If you opt to replace the flange on your tub yourself, make sure you have the right tools and the