How to check fridge relay with multimeter?

If your fridge is not cooling properly, you need to check the fan motor or the compressor. It does not matter whether the fridge is an old or a new one. If the problem is with the fan motor or the compressor, you will have to replace it. But before replacing them, you need to check the fridge relay to make sure these are working properly.

How to check fridge door relay with multimeter?

To check the condition of the fridge door motor, simply turn on the power supply to the fridge. Then, press down the door’s handle. Once the door is closed, you should hear a click sound. That is the sound made by the fridge door motor. Turn on the power supply to the fridge and take the door’s handle down. If you hear a click sound, it means that the motor is working fine. If you hear an unusual sound, it could be an

How to test fridge relay only with multimeter?

There are two methods to check the fridge relay. You can test the coil of the relay itself or test the circuit of the whole system. Test the coil of the relay itself is an easy task. For the circuit method, you will need a multimeter, some other tools, and some knowledge about electricity. If these are all the things you have, then you can do the test.

How to check fridge main relay with multimeter?

Look at the metal strip of the relay board on the refrigerator at the compressor compartment to locate the test point. Once you locate the test point, take out the screw that’s holding down the small metal strip to expose the contact points. If the switch is not working, you will not see any continuity. You will see two metallic points which are normally connected. This is the test point for the refrigerator main relay.

How to test fridge relay with multimeter?

To test the circuit, start by applying power to the fridge compressor and the fan. If the circuit works correctly, the fan will start whenever the compressor is on. If the fan doesn’t start, it means the fridge’s compressor has failed. You can easily check whether the compressor is working with a multimeter. Just connect the black probe of the meter to the power line, and the red probe to the neutral line. If the current drawn by the compressor isn’t