How to clean a fan tower?

It’s a pretty simple process and can be completed in a few hours, provided you have the right supplies. First, turn off the power to the unit and unplug it. Remove the grille from the front of the fan and turn the fan so that the blades are pointing down. Spray the fan blades and the surrounding area with water and let it sit for a few minutes so the water has time to soak in. Then use a clean cloth to gently wipe off the fan blades

How to clean a fan tower filter?

As mentioned, the filter is usually located within the fan unit. To clean it, turn off the machine and wait for the fan to stop spinning. Once it has, reach for a can of compressed air. Spray the interior of the filter with a few bursts to dislodge any dust buildup. Afterward, simply remove the filter and shake out the excess dust. Use a small brush to scrub the filter further to remove any remaining debris. The filter should then be wiped down with a dry cloth to

How to clean a tower fan filter?

If the dust has built up on the fan filter, it will reduce the air flow and potentially cause your air conditioner to work harder to move the same amount of air. If the dust is fine enough, it can be dislodged by shaking the filter gently from side-to-side. If you can see dust build up on the filter, it is best to change the filter.

How to clean a fan tower with haze filter?

The fan tower can be cleaned with a simple solution of water and a small amount of dish soap. Make a bucket of soapy water, pour it into the bucket, and add some water to it. Now submerge the entire fan tower in the bucket. Leave it for about ten minutes and then clean it using a clean cloth. Make sure to use warm water and not hot water as this will damage the fan tower. After the cleaning is done, let the fan tower dry.

How to clean a fan tower filter without water?

If your fan has a filter, it’s a good idea to have it changed every 1-3 months. Always have several filters on hand. Since they tend to be pretty expensive, we don’t recommend cleaning them with water. While it may seem to work, the fan will have to work harder to pull air through the filter and you’ll be wasting your money. Instead, take your filter off and use a small amount of baking soda, water and vinegar. Using