How to clean a Nova tower fan?

Depending on the buildup of dust and other particles, you may need to use more than one cycle to clean the blades properly. Leave the fan running for about an hour to allow the dust to dislodge. If you see spider webs in your fan, use a vacuum and gently remove them.

How to clean a nova tower fan filter?

To clean the air moving through your nova tower fan’s filter, first remove the filter from the fan. If you’re unable to do this by hand, use a pair of pliers or a special filter removal tool. Once you’ve removed the filter, use a filter cleaning brush to clean the filter’s surface. Use a dry cloth to clean the filter from the inside out.

How to clean a nova tower fan blade?

From time to time, the fan blades need to be cleaned as dust, pollen, pet dander, and other airborne particles can accumulate on them and cause them to become clogged. This will result in ineffective airflow. It is recommended to change the blades every 1-3 months. You can also clean the blades using a vacuum cleaner or by using a cleaning cloth. Make sure you do not use any chemical-based cleaners or harsh substances that can harm the blade.

How to clean a nova tower fan motor?

The first thing you should do is make sure the fan is unplugged and completely turned off. Disconnect the power from the outlet and the fan from the wall. All of the wires should be covered with plastic to prevent accidental contact. Now, gently remove each screw securing the motor to the fan housing. Do not pull the wires out of their sockets as this may cause damage to the motor. Carefully lift the motor out of the housing and set it aside. Once the motor is out,

How to clean a nova tower fan exhaust?

First, turn off the fan and wait for a few minutes for the motor to cool down. Unscrew the two nuts that secure the fan’s motor to the fan’s shell. Remove the bolts and slowly push the fan out. Be careful as you do so as the blades can still be turning at high speed. Once the fan is off, you can now reach into the fan’s shell and clean it out with a cloth or brush. Use warm soapy water