How to clean a riding lawn mower carburetor (Briggs and Stratton)?

You can clean the carburetor of a briggs and Stratton riding lawn mower yourself with a little bit of know-how and some special tools. Depending on the condition of the carburetor, you can clean it with a carburetor cleaner or with gasoline. Once you have cleaned the carburetor you will need to dry it so that it remains free from moisture. You also need to put some lubricant on the carburetor to ensure it runs smoothly.

How to clean a Briggs and Stratton riding lawn mower carburetor?

The first thing you need to do is completely cover the lawn mower engine when you are working on it, to avoid sparks. Disconnect the spark plug wires from the spark plug and place the spark plug in a glass jar filled with carburetor cleaner (or any other approved cleaner). Leave the jar in the engine for a few hours, with the spark plug connected. While you do that, it’s a good idea to clean the engine’s intake and exhaust valves, as

How to clean a Briggs and Stratton lawn mower carburetor?

The first thing you need to do is to remove the spark plug wires. Then, you need to loosen the clamp that holds the fuel line in place. Remove the fuel line, and then remove the fuel cap. You can do this by turning the cap counterclockwise and then pulling it towards you. You will need to use a small screwdriver to push the fuel line back far enough to remove it from the carburetor. Then, you can pull the fuel line out of the carbure

How to clean a Briggs and Stratton mower carburetor?

You’ll need to remove the spark plug and the air intake tube. Use a small screwdriver to pop off the air intake screen. If you cannot remove the screen, carefully scrape it off with a plastic spatula to clean it. You should also clean the air filter. If your mower has an oil filter, remove it as well. These parts can be wiped clean with a clean cloth. If you can’t access the carburetor from underneath your mower, you

How to clean a

To clean the carburetor, take off the float bowl and clean the bowl with a rag that has been moistened with gasoline. The bowl will be easier to clean if you tilt it slightly. Carefully run the carburetor in the off position and move the bowl of the carburetor back and forth to clean it completely. Replace the float bowl, then test the engine to make sure it runs smoothly.