How to clean a tornado tower fan?

The first thing you should do is unplug the fan, as electric fans can expose you to sparks and fire if they’re left on after a power outage If you don’t unplug the fan, someone working on the system may assume the fan is no longer connected and try to start it. Electrical equipment left running without the proper safety precautions can create a hazardous situation, especially in an older home.

How to clean tornado tower fan belt?

A tornado tower fan has a belt running around the outside of the fan unit to drive air through the fan. This belt is prone to dust and debris, especially if you live in an area with lots of trees or plants. If the belt becomes dirty, it can impact the air flow through the fan which reduces the efficiency of your air conditioning system. Clean the belt on your own or have an HVAC technician clean it for you. You can clean the belt manually by removing the belt from the

How to clean a tornado tower fan motor?

There are two types of tornado tower fan motors: belt drive and pulley drive. A belt drive motor is hung on a ceiling or roof whereas a pulley drive motor is mounted on the floor. Both types of motors contain metal coils that attract dust and debris. You can clean the coils by using a soft brush and detergent. You can also use a can of compressed air and a rag to clean the motor. You can also wrap the motor with a wet towel to dislodge any residual dust

How to clean tornado tower fan blade?

Firstly, you need a suitable clean cloth and some soap and water. You can also use a vacuum cleaner to get all the dust off the blades. After that, you need to clean each blade separately using a scrubber. The scrubber should have a soft brush to avoid scratching the blades. Make sure to scrub in the opposite direction of the fan’s spin. Using too much force can damage the blades. Once you have scrubbed every part of the blades, rinse them with water.

How to clean tornado tower fan with the remote?

Using a remote to clean your tornado fan is a great way to combat the dust bunnies that can accumulate in your fan. To use it, simply press the fan blades to the off position. Then, press and hold the clean button on your remote and slowly spin the motor to spin the blades. When the fan is fully cleaned, press the off button again to stop the fan.