How to clean a wood stove fan?

Wood stove fans are difficult to clean because they have multiple moving parts. These fans are usually located at the top of the wood stove, so any dust or soot that you see will be blown towards the front of the stove. To clean the fan, you will need some protective gear. Wear a dust mask, safety glasses and long gloves. First, turn the stove off. Then, remove the fan by lifting the cover. Disconnect the wires from the fan and remove the fan from the stove

How to clean wood stove fan?

You could brush the fan from top to bottom after you turn it off. If there are any pieces of debris hanging from the fan blades, use a small brush to carefully dislodge them. If you use a vacuum cleaner to clean the fan, don’t use the regular brush setting. Always use the low suction setting. If you’re unsure how to use a vacuum cleaner, don’t use one at all!

How to clean a wood stove fan filter?

The wood stove fan filter’s job is to capture the particulate matter that passes through the air intake so your air does not. Periodically, the filter needs to be cleaned or replaced. If you have a new stove, you may want to change it every year. Your wood stove fan filter will come with detailed instructions on how to clean it. First you need to turn off your stove and wait 20 minutes so the filter can expel any collected dust. Then use a vacuum cleaner with

How to clean a wood stove surround?

It’s very easy to clean the wood stove surround, especially when it’s already clean. Just take a bucket of soapy water, and using a clean towel, scrub it down. If you notice any stains or spots, gently scrub them off with a toothbrush or nail brush. Lastly, let your stove dry off.

How to clean a wood stove hood?

To clean the wood stove hood, turn the fan off first so that the airflow is obstructed. Using a shop vacuum, dust any accumulated debris from the inside of the stove’s upper and lower portions, including the fan blades, grill, and surrounding area. Use a brush to scrape away any remaining dust or crumbs from the fan housing itself. Using a wet rag, wipe down the surfaces of the fan to remove any dust or dirt, and allow the wood stove hood to dry completely