How to clean aluminum boat lift?

Aluminum boat lifts are very corrosion resistant and can easily last for years. Aluminum boat lifts are easy to clean — the boat lift deck and the platform are made from aluminum which is very easy to clean. The boat lift can be cleaned by scrubbing it with soap and water, or with any other cleaner that can reach these surfaces. Make sure to remove any stored items before you scrub so there’s more room for the water to get to all the parts.

How to clean aluminum boat lift motor?

When you are not using your boat lift, it is necessary to clean the boat to prevent corrosion For example, remove the boat plug, cover the boat, and leave it somewhere out of direct sunlight to allow the aluminum to fully dry off. Use a shop vacuum to remove any dirt and sand from the boat’s surface. Use an all-purpose cleaner and scrub the boat’s surface to remove any stains. Depending on the type of boat, you might need to use a chemical

How to clean aluminum boat lift cover motor?

It’s very easy to clean the motor: first, take off the protective cover that protects the motor from the weather and dust. Wash the motor with soap and water using a wire brush then dry it. Now you can apply a lubricant on the motor (if necessary), and it will work as good as new.

How to clean aluminum boat lift cover?

Aluminum boat lift covers are prone to accumulate dust and debris, especially in dryer climates. Over time, the buildup of dust can lead to rust and corrosion if it isn’t cleaned regularly. The best way to clean aluminum boat lift cover is to use a high-powered vacuum and a boat cover brush. If the cover is heavily soiled, you may need to use a scrub brush and water mixed with detergent.

How to clean aluminum boat lift bumper?

Aluminum boat lifts bumpers tend to accumulate a lot of debris. You may have to clean them more frequently than the boat deck since they are exposed to the elements and dirt. Vacuum underneath the boat lift every two weeks and use a wet towel to clean off any dirt or algae buildup. Use a water hose to scrub the bumper if it gets dirty. If the boat lift bumper is damaged or corroded, you will need to replace it.