How to clean cast iron pan supports on gas hob?

If you really want to get the job done, you’ll need to scrub the supports with a mild soap and a toothbrush. But be careful! There are a few spots where the underside of the gas stove is very hot. Do not touch these spots with your hands or a cloth. Use a plastic scrub brush or a plastic scouring pad instead.

How to clean cast iron pan support on gas hob UK?

Firstly, remove the grease around the support. Then, very gently, wipe the area with a cloth to clean it. Afterward, make sure to rinse the support with soapy water, then dry it with a cloth. Or you can use a wet and scented cloth to clean the area.

How to clean cast iron pan supports on gas stovetop?

When your gas stove gets dirty, it’s not only the stove top that looks dirty, but also the gas burner and the surrounding areas. The cast iron gas burner is very easy to clean. To clean it, use a cleanser soap and water, scrub the burner with a scrubber, and dry it off with a towel. You can use a scrubber made of nylon to clean the burner’s outer surface.

How to clean cast iron supports on a gas range?

So, you have a new gas range and all is well but the stove itself is acting up. You hear a sound similar to a hissing when your pans are placed on the stove and it smells like gas. Well, chances are it’s not the stove but the stove supports that need some cleaning. If the stove is relatively new, the parts of the support that are most likely to get dirty are the little metal clips that hold the burner in place. They’re easy to

How to clean cast iron pan supports on gas hob UK?

The most important thing to do before you begin cleaning is to ensure the hob is turned off. This will prevent sparks or burns if you happen to stumble while cleaning the stove. Using a clean cloth, scrub the surface of the stove’s burner to remove any food residue and grease. You can also use a cleaner specifically designed for cast iron to remove any rust or mineral build-up. Let the burner dry completely before continuing. Depending on the type of surface, you may need to use different