How to clean dual shock 4 analog sticks?

The most common cause for the dirty feeling of the gamepad controller is dust. The best way to clean it is to use a microfiber cloth to gently wipe the stick of the controller. Do not use an extreme cleaning method as it can damage the build of the gamepad or the stick. Also, do not use a wet or moist cloth otherwise it can leave marks on the gamepad. It is also important to keep the gamepad dry to avoid the absorption of dust particles. If the

How to clean dual shock

First, you will need a microfiber cloth, some gentle detergent, water and a toothbrush. Be sure that you only use the soap to clean the stick and not the entire pad. You want to avoid using any cleaners that contain alcohol, as they will dry out the stick’s lubrication. When you use the toothbrush to clean the stick, scrub it in a circular motion. Don’t scrub too hard or you will damage the stick.If you have a

How to clean dual shock analog sticks?

The best way to clean the analogue stick on your DS4 is to use a soft cloth and a solution of water and dish soap. Soak the cloth in the solution and gently clean the stick. Repeat the process twice or until the stick is clean and free from any residue or build-up.

How to clean DSanalog stick?

The way you clean your DSanalog stick depends on whether your stick is glossy or matte. If your stick has a glossy finish, you can clean it with a duster and some isopropyl alcohol. Use a microfiber cloth to gently rub off dust and debris. Use a small amount of isopropyl alcohol to further clean the stick and remove any leftover debris. If your DSanalog stick has a matte finish, use a damp rag and some glass cleaner or household deter

How to clean a dual shock wireless controller?

The first step to clean your DS4’s analog sticks is to remove the triggers, joysticks and face buttons. These are the most commonly forgotten when it comes to cleaning your DS4’tastes, odors and gunk can easily accumulate in these small areas, making them gritty and unpleasant to use. Once you’ve removed all the buttons and joysticks, use a wet cloth to clean the horizontal sticks, paying special attention to the grooves where the stick rests