How to clean electric fan motor?

You clean the fan motor with a toothbrush and water. You use a toothbrush with a good amount of toothpaste, dip it in water and clean the fan motor. Keep scrubbing the fan motor with the toothbrush and the toothpaste for several minutes. Then, put the fan back together. Afterward, clean the blades of the fan with a clean cloth. If you still can't see clear, you can clean the blades with a scented soap solution. Let the fan dry completely

How to clean electric fan motor hub?

The fan motor is located inside the fan housing and is generally made up of plastic, rubber, and metal components. If you want to clean the fan motor hub, you will need to dismantle the fan housing so you can access the inside. If you don’t feel comfortable doing this, you should always call in the professionals to clean it for you. Once you have disassembled the fan housing, you will need to take off the fan motor and clean it separately.

How to clean old electric fan motor?

Before you start cleaning the fan motor, make sure the fan is turned off. Now, take a small screwdriver and remove the screws that hold the electric motor onto the fan. After that, remove the fan blade. Now, take some warm water and a cleaning agent and pour it into the fan. If the fan is dirty and greased, it will create a lot of problem while it is running. Let it soak for about 15 minutes. Afterward, use a dry cloth and clean the

How to clean electric fan motor bearing?

First, you need to disassemble the fan motor. Carefully remove the fan motor from the fan frame and support it with a towel. Using a screwdriver, loosen the motor’s mounting screws keeping the fan motor away from the fan blades. Now, you need to separate the motor’s housing from the motor’s shaft. Do not remove the fan blades. After separating the fan motor’s housing from the motor’s shaft, you need to remove

How to clean electric fan resistor?

To clean the fan motor resistor, you need to remove the fan blade from the motor. Once you do that, locate the resistor. You will find the motor resistor board on the underside of the fan motor housing. You need to remove the fan blade and then remove the resistor board, carefully, as you do not want to damage it. Once you have done that, you will need to clean the fan resistor using a very fine cloth dipped in some alcohol. Once you have cleaned the fan resistor,