How to clean out a PS4 controller?

When gaming for extended periods of time, your PlayStation 4 controller can get pretty dirty. Fortunately, it’s very easy to clean your gamepad Use a damp cloth and soap to clean the buttons, joysticks, triggers, touchpad and d-pad. Use a dry cloth to remove any excess moisture. You can also use a small, inexpensive bottle of screen cleaner to clean the touchpad and d-pad.

How to clean out a PScontroller button?

A PS4 controller button is most likely to get dirty if it has been used for gaming, especially if you play online. You will find that this button will be very easy to get dirt on it. You can use a cloth to clean this button but do not use any cleaning agents on it as this could damage it. If you prefer to use a cleaner, you can use a simple baking soda and water solution.

How to clean out a PScontroller battery?

Most gaming controllers have a small power cell that stores enough energy to last for a few hours of gameplay. Replacing the battery with a new one is usually an easy task. You can find replacement batteries at your local electronics store. Before changing the battery, make sure to remove all the small pieces of detritus that may be lodged inside. After removing the battery, submerse the entire controller in a bucket of soapy water for a few minutes to dislodge any dirt that might be stuck to

How to clean a PScontroller?

First of all, the PlayStation 4 controller is made of plastic, so it’s pretty easy to clean. Aside from the buttons, there are two small areas around the D-pad and the joysticks. These are the hardest to clean because they are very thin and susceptible to picking up dust and debris. To clean these areas, simply rub some soap onto a soft cloth and clean them with a gentle scrub. After doing this, you can either use a soft cloth to dry them or use

How to clean out a PScontroller switch?

The easiest way to clean out the switch is to use a small amount of alcohol and a toothbrush. Since there’s no internal mechanism to clean the microswitches, you’ll need to use a toothbrush to clean them out. After that, you just need to shake the switch to dry it out.