How to clean PS4 CD drive?

Using soap and water, make sure to clean all areas of the drive’s interior, including the read/write laser, the motor, the optical pickup, and the contacts that connect all these components. Don’t forget to clean the front and back of the disc drive unit. If you want to clean the disc drive automatically, you can use a software as well as hardware-based approach. Some software-based solutions are free while others cost money. You can also clean your disc

How to clean PSCD drive tray?

The PlayStation 4’s main storage unit is its pscd drive. This device is located underneath the console and connects to the motherboard to store data and games. This unit is also responsible for reading and writing data when you insert or remove games from the console. The PSCD drive is usually not visible to the end user, but it is not impossible to see it. The easiest way to clean the PSCD drive tray is to use a microfiber cloth. You can gently

How to clean PSCD drive screen?

If the dust is covering the screen of the PS4 disc drive, then you can first clean the screen with a wet cloth. Now, use a dry cloth to remove the dust from the screen. The dust will automatically get wiped off the screen. To clean the disc drive’s laser and its sensors, use a clean cotton cloth with a few drops of alcohol on it. Rub the cloth on the inside and outside of the disc drive, and then rinse it off with clean water. If

How to clean PSoptical drive?

Optical drives are more sensitive to dust and dust bunnies than hard drives are. So, you need to clean them more frequently, use a high quality brush and a cleaner that will not leave any residue. Also, do not use any sort of a cleaning product that will harm the optical drive or leave scratches on it. These scratches will definitely decrease the longevity of the drive.

How to clean PSCD tray?

The PSCD tray is the part of the drive where discs are loaded. If this part gets dirty, it can lead to scratched discs and other issues. To clean the tray, remove your disc and insert a large piece of paper towel. Then, rub the area gently with a few drops of isopropyl alcohol. Be careful not to apply too much pressure or you might damage the tray. After applying the alcohol, press the tray back into place. Replace the disc and turn on your