How to clean your pool filter sand

How to clean your pool filter sand?

If you are using a conventional filter you will need to clean it off on a regular basis. However, if you have a cartridge filter, you will want to do a thorough clean every few months. You will need to take the filter out of the pool and clean it by hand, much like you would a coffee maker. Turn the filter over and take out the filter cartridge. Then, take a scrub brush and scrub the filter from top to bottom. Make sure you

How to clean a sand filter?

You can clean your pool filter with a high-quality filter sand. The sand is made of silica and will naturally capture the fine particles that may be passing through your filter. For this reason, you should only use sand that is made for filtering purposes. If you use other types of sand, the particles will most likely end up in your pool water.

How to clean a pool filter cover sand?

If you don’t have access to the sand filter, you can clean the filter cover with a hose. Turn on the faucet and let the water flow slowly. Let the water run for about ten minutes to dislodge any sand or debris that may have collected on the filter cover. After the water stops, turn off the faucet.

How to clean pool filter sand trap?

The sand trap is the first line of defense in covering your filter from fine particulate matter entering your pool. The sand trap is usually located in the cartridge housing and is commonly known as the “choke” or “snake” due to its snake-like appearance. If the sand trap becomes clogged, it will prevent water from flowing through the filter system and subsequently into your pool.

How to clean a pool filter sand?

Most often, the sand is trapped in the filter because the filter is blocked. To clean the filter, first, skim the surface of the water. Then turn the filter off and unplug it. Take a bucket and fill it with water and sand. Begin to shake the water and the sand inside the filter. Continue for a few minutes until you see the water and sand begin to drain. Now, you can take the sand out and rinse the filter with water.