How to clean your PS4 system?

From time to time even the best cleaning methods are not enough to get rid of stubborn stains, dust and other debris. The PlayStation 4 console is not an exception. If you want to keep your system clean, you need to employ special techniques and use the right cleaning products. There are numerous ways to clean the interior of your console. Let’s discuss the best ways to clean your PlayStation 4 system.

How to clean your PS

The playstation 4 has a few different spots where you might want to clean it. One you can do yourself is the power supply. It’s a small compartment located between the two main board components, and you can access it by removing the system’s cover. You’ll want to use an antistatic cleaner and a small brush to clean it. If you want to clean the disc drive, you’ll need to disassemble it. Turn the system off and

How to clean your PScontroller?

You can clean the PlayStation 4 controller using a small towel or piece of cloth that has been moistened with a mild detergent solution. The best way to clean it is to take off the faceplate and then clean the touchpad, buttons, triggers, d-pad, and the circular pad that connects them all. You may also want to clean the charging port on the back of the controller as well. After cleaning the controller, you can replace the faceplate and put it back on.

How to clean your PShard drive?

First, you need to locate the system board, usually at the bottom of your console. There you will find two small screws. Once you remove them, you will be able to access the shard drive. You may want to use a small brush or a paper towel to clean it. You may also want to use a cleaning liquid to ensure that it is free from any dust and dirt. After that, you can insert the shard drive back into the system board. Finally, replace the screws

How to clean your PScontroller button?

If you are wondering how to clean the PScontroller button, you can use alcohol wipes. Clean the entire area of the PScontroller button using a small amount of alcohol. Make sure you don’t put too much pressure on the button as it is very sensitive. Leave it to dry for a few hours on a cool setting.