How to correctly assemble a ratchet strap?

First, find your part of the strap s length. You will need to cut the strap to this length. Strap manufacturers usually include a diagram that shows you the overall length of each strap and the cut length needed to properly fit your equipment. If you don’t have a diagram, cut the length yourself with a ruler and mark the ends.

How to properly use ratchet straps?

Before using any type of strap make sure to read the packaging to find out the appropriate length for the strap. You don’t want to use too much or too little. Make sure to also read the assembly instructions to find out how to correctly use the ratchet strap. Once you have the correct length of strap, tightly wrap the strap around whatever you are securing with the ratchet strap.

How to tighten ratchet strap correctly?

To tighten a ratchet strap, you need to use a wrench. If you don’t have a wrench, then try using a screwdriver, though this might take longer to do. The best way to tighten a ratchet strap is by applying firm but even pressure in a clockwise motion. A ratchet strap should not be over-tightened as this can cause it to break.

How to correctly tighten a ratchet strap?

You have to pull the strap to tighten the strap. Once you’ve reached the desired tension, lock it in place with the teeth of the ratchet. If you don’t lock the strap, the tension will slowly decrease. Always lock your ratchet strap before storing it.

How to tighten a ratchet strap?

You need to make sure that when you pull one end of the strap to tighten it around the load, you don’t pull out the ratchet teeth. Otherwise, you’ll be forced to replace the ratchet strap. The best way to do this is to pull in the opposite direction of the teeth.