How to cut concrete board siding?

If you are using a circular saw, you will want to cut the board in two at an angle Note that the board will be slightly bowed, so to determine the angle you need, measure the board’s width at the ends and mark the board with a line where it meets the ground. Next, measure the board’s thickness at the ends and mark the board with another line. Now you can mark the cut line by adding a line between the two lines you previously made and

How to cut concrete board siding with a table saw?

This type of siding is cut with a table saw. Cut both sides of the board at the same time. Set the fence to the width of the board plus a little extra so you don’t cut off the end. Set the depth to the thickness of the board plus about a half an inch. Set the kerf (the gap between the board and the blade) to the same depth. Set your cut depth to match the length of the board plus a couple of extra inches.

How to cut concrete board siding with a circular saw?

A circular saw works fine for cutting concrete board siding when you make a straight cut. Here’s how: Set the depth of your circular saw to the thickness of the concrete board you’re using. Set it at an angle of about 30°, because a 90° cut would tear up the edges of the board. Using a circular saw with a guide helps you make a straight line. If you don’t have a guide, mark out the board in chalk, then

How to cut concrete board siding with a miter saw?

A miter saw is one of the most popular tools used for cutting concrete board siding. This type of saw has a rotating blade that is adjustable to any angle. The saw has a motorized system that allows you to make quick and accurate cuts. You can also use a miter saw to cut down wood to size, laminate flooring, and more.

How to cut concrete board siding with a power saw?

You can use a circular saw with a diamond or carbide-tipped blade to cut these types of siding. Set the depth to about one-eighth of the board’s thickness, and make sure to keep the board level with the surface you’re working on. You can use a circular saw with a diamond blade for cutting concrete board siding that has a roughened surface, such as textured or pebbled.