How to cut drywall around electrical boxes?
You can cut drywall around electrical boxes with a utility knife, a shop vacuum, or an electric drywall saw. The type of drywall saw you choose depends on how much experience you have and the accessibility of the boxes you need to cut around.
How to cut drywall around an electrical outlet box?
The most straightforward method for cutting drywall around an outlet box is to use a circular saw, which allows you to cut along an even straight line. However, you should be aware that drywall may be damaged when using a circular saw so be extremely careful when approaching the box and always wear protective eyewear. If you don’t have a circular saw, you can use a jigsaw or a small handsaw to cut the drywall around the box. However, it will take more
How to cut drywall around an electrical box in door?
If you need to cut drywall around a door frame where an electrical box is installed, use a jigsaw with a thin, flexible blade, or a drywall saw with a flexible blade. Drywall saws can be dangerous if they're used without the proper protective gear — always wear eye protection, a hard hat, and thick gloves. The drywall should be cut back to the studs or joists. For a tight fit, add drywall shims.
How to cut drywall around an electrical box?
You can cut drywall around electrical boxes using a drywall knife. If you don’t have one, you can use a utility knife or a sharp drywall saw. The drywall tape should keep the drywall from splintering as you cut. If the drywall tape looks like it’s ripped, it’s fine. Just cut around it. Focus on keeping the corners of the drywall flat.
How to cut drywall around electrical outlets?
The drywall around outlets and switches should be cut flush with the wall surface. But if your electrician didn’t do a good job, your drywall will be slightly higher than the boxes. You can fix this by sanding it down (don’t sand the box or socket) until it’s flush. Then, apply a coat of paint, dry, and you’ll have a nice flush drywall look with no work required!