How to cut drywall around outlet boxes?

You can cut drywall using a drywall saw with a fine-tooth blade. A drywall saw has a long handle so it’s easier to maneuver into tight spaces. To cut drywall around an outlet box, start by positioning the box in your workspace and mark the location of the box on the drywall. You can use a drywall marking tape to make the mark, or use a mark made by your outlet box. Once you’ve made your marks, cut

How to cut drywall around a water outlet box?

To ensure a smooth transition between wallboard and the box, cut a V-shaped notch in the drywall around the box. Then use a drywall knife to score the back of the box, to make sure the box is flat against the wall. Screw the box into the wall using the provided screws.

How to cut drywall around outlet box?

Drywall cut to size around an outlet box is held in place by drywall tape, which is typically self-adhesive. Use drywall tape sparingly and cut it so the edges are square to the box. After taping the drywall into place, cut any excess drywall so the box is flush with the wall surface. If you have a router with a plunge-cut bit, you can cut the drywall around the box with a plunge cut. Drywall cut with a plunge

How to cut drywall around outlet box for a water heater?

Many water heaters are installed into the wall and have an outlet box mounted to the drywall. Depending on the type of drywall you have, it may be easy to cut the drywall around the box but harder to create a nice, clean edge. You can use a utility knife to score the drywall around the box and then snap it away from the wall. You can also use an oscillating saw to cut the drywall.

How to cut drywall around an outlet box for a water heater install?

Most water heater outlet boxes are pretty small, and you can cut the drywall around them with a utility knife (or with a utility knife and drywall snapper). However, for your safety, you should always cut the drywall with a drywall saw. A drywall saw will keep you from accidentally cutting into the box or the wiring it connects to.