How to cut drywall around plugs?

There are two types of drywall faced wallboard: 1-by-4 (also known as half-width) and 5/8-by-3 (also known as quarter-height). If you’re working with a 5/8-by-3 board, you’ll need to cut it to length using a drywall saw. If you’re working with a 1-by-4 board, you can cut the drywall to the right length using

How to cut drywall around electrical outlets?

Electrical outlets are another common place for drywall to come up short. If your drywall is already tucked up around wall sockets, you can cut a small hole in the drywall. But if the drywall is bulging around the sockets, you’ll need to cut away the drywall to create a flat surface. Use a utility knife to cut around each outlet with a straight line, then remove the drywall and sand the area. You can also fill the hole with drywall put

How to cut drywall around outlets?

Sometimes there are a lot of outlets where you need to cut drywall. For example, if you have a row of outlets along a wall and you need to add a piece of drywall behind the outlets, you’ll want to cut a section of drywall that’s large enough to cover the entire row of outlets and then cut out a hole behind each one to fit the plug.

How to cut drywall around electrical switch?

Cut a groove around the area where the switch box is mounted. Drywallers often use a metal or plastic guide to help hold the drywall in place while installing the box. If you don’t have one handy, use a utility knife to cut a groove. Be careful not to go through the switch box.

How to cut drywall around

The first thing to do when preparing to cut drywall around wall plugs is to ensure you have the right tools and the right technique. The most common tools needed for cutting drywall around wall plugs are a drywall saw and a utility knife. A drywall saw is used to cut through the drywall around the wall plug to expose the connection. A utility knife is used to cut the drywall from the wall plug and any excess material left over around the connection. If you do not have a