How to cut drywall on a stud?

First, you’ll want to make sure the drywall is secure on the studs. With a studded wall, the drywall is attached to the metal framing joists so you can apply pressure to the wall system. If the drywall isn’t secure, it could fall off the studs. This is especially common when you’re working on the ends of the wall. If you’re unsure if the drywall is secure, pull back on the dry

How to cut drywall on a stud wall?

drywaller use a special drywall saw, called a diamond drywall saw, for cutting drywall on a stud wall. A diamond drywall saw has a thin metal blade with serrated teeth on one side. The drywaller holds the saw with the teeth down and slowly pushes it into the drywall. If the drywaller is able to cut the drywall in one cut, great! If not, he or she will have to saw the drywall several times. The drywall

How to cut drywall in a stud bay?

You’ll need to cut the drywall at the ends of the stud bays as well as the ceiling joist/floor joist intersections. Cutting these corners is easier than cutting drywall in the middle of a stud bay, especially if you’re working alone or with a partner. You can use a drywall saw for this job, and it’s easiest to cut corners using a large-blade saw. If you have a circular saw and/or a reciprocating

How to cut drywall on a box beam?

A box beam is a structural framing member that looks like a large “T”. It’s made up of two side members and a top member. The top member is parallel to the floor joists, and the two sides are perpendicular to it. In older homes, box beams are often made of two pieces of 2×6 framing joined together with metal plates and screws. But more modern box beams are often created with 2-by-8 framing, which is much stronger and

How to cut drywall on a steel stud?

If you have drywall on steel studs, you should use a drywall saw with a high-definition blade. Cut the drywall on the jointery line that runs down the center of the wall. If you can’t find the jointery line, then use the drywall cut line as a guide. You’ll need to use a stud finder to locate the joinery line on the steel studs. If the joinery line is still visible