How to cut Hardin board planks?

With planks from Hardin board, you will be able to create a wide variety of projects. If you want to use a deck on your home, Hardin board is the perfect deck board for exterior decks. It’s water resistant, lasting up to 12 years. It’s also designed to resist insect damage.

How to cut Hardin board scratches?

Hardin board scratches are created when planks are cut either by hand or with a power circular saw with a standard blade. Scratches can also occur when installing the board over uneven surfaces. Regardless of the source, scratches can be prevented by keeping the board level and using a sharp blade and a guide.

How to cut Hardin board decking?

If you are using a circular saw with a cutting guide, you can use the guide to make straight cuts. To cut planks to length, set a mark on the board at the desired length. Use a tape measure and mark the length on the board. Set your circular saw to the appropriate depth setting and cut along the mark. Fasten the board to the wall with nails or screws.

How to cut Hardin board molding?

Hardin board molding is a popular choice for finishing the edges of cabinetry, walls, doors, and even furniture. Although the boards are incredibly strong and look great, they can be challenging to cut. While you could use a circular saw or a jigsaw, it may be best to invest in a specialized molding board cut-off machine. Before making any cuts, make sure to clamp the board down securely to a flat surface, like a shop vac. Also, be sure to wear

How to cut Hardin board to fit?

The length of Hardin board planks can vary based on the different thicknesses available. Common board thicknesses are 5/8″, ¼″, 1/2″, 3/4″, and 1″. The board thickness determines the width of the board and the number of planks per foot. For example, a board that is 3/4″ thick will generally have four planks per foot. If you plan to cut two-by-six boards, you will need