How to cut Hardin board siding video?

To cut Hardin board siding you’ll need a circular saw, good lighting, and a cutting guide. A circular saw with a blade that can cut at an angle between 22 and 30 degrees is best. You’ll want to set the depth of the blade to 2-3 times the thickness of the siding.

Set the cut depth to the same amount as the gap between the boards.

You can use a straight edge guide and miter gauge to ensure you’re

How to cut Hardin board siding?

For the best results, use a circular saw with a masonry blade. For a clean cut, set the blade depth to the thickness of the siding If not, you’ll end up with a jagged edge. After setting the blade depth, test-cut a piece of scrap wood to ensure that you have the right amount of clearance.

How to cut Hardin board siding without popping out?

Well, the trick is to cut the siding from the underside. That way, you won’t have to deal with any visible sawdust that will pop out of the siding. Plus, you won’t have to deal with any jagged or uneven edges along the ends of the board. When you’re ready to cut, place the board on the floor with the siding hanging over the edge. Set the board onto two sawhorses, one on each side

How to cut Hardin board siding without prying?

One of the most common questions asked about Hardin board siding is how to cut it without prying. While it is possible to cut this type of siding without prying using a trim saw, doing so is a lot more challenging than with plywood or OSB. The unique design of Hardin board siding means that it has a lot of tightly fitted grooves. When you pull the siding apart, the grooves force the pieces apart, making the siding much harder to

How to cut Hardin board siding without knocking out?

Like plywood, Hardin board siding is pretty hard to cut without a saw or a power saw. If you don’t have one of those tools, you can rent them at your local hardware store or borrow one from a neighbor. If you decide to use a hand saw, be sure to have a good plan and some protective gear, such as safety glasses, a dust mask, and heavy work gloves.