How to cut paver stones with a circular saw?

The circular saw is the most common tool used to cut paver stone. The motorized saw itself is a very simple device, but the process of using it to cut paver stone is more difficult than it looks. In order to get a clean cut and to prevent the stone from chipping, it’s important to know the right settings for the power, the speed, the depth and the feed rate of the saw. Not following these instructions could result in a poor cut or cause the

How to cut thick concrete paver stones with a circular saw?

Cutting concrete is one of the trickiest tasks you'll face when working with stone pavers. For smaller, thinner pieces, you can use a circular saw with a diamond-tipped blade and a guide. Make sure your guide is securely fastened to the saw and set the depth to just slightly more than the thickness of the stone. For larger, thicker pieces, you'll need a circular saw with a diamond-tipped blade. Set the depth of your cut to the stone's thickness.

How to cut concrete pavers with a circular saw?

When it comes to concrete pavers, one of the most intimidating tools to use is a circular saw. While it may look intimidating, the circular saw is not only easy to use, but also quite simple. To cut concrete pavers with a circular saw, you’ll need a diamond blade and a good dust mask. Before using the saw, you’ll need to clamp the stone to the table of your circular saw to hold it in place. Then, turn on the saw and

How to cut pavers with a circular saw?

Cutting paver stones with a circular saw is not as easy as it sounds, especially when you consider the danger of the diamond-shaped stone pieces that are a lot thicker than a piece of wood. These paver pieces are much harder than a piece of wood, so they don’t shrink as much when they’re heated up, or expand as much when they’re cooled down. That means that whatever the shape of the stone is, it’s going to keep

How to cut concrete paver stones with a circular saw?

To cut concrete, place the stone on a flat surface, level it off, and clamp the stone to the surface with a piece of plywood and wood blocks. If the stone is too heavy, place a board beneath it. Set your circular saw to about 3/4-inch depth and start cutting. You can cut concrete paver stones with a circular saw in a shop, but it’s safer and more convenient if you do it outdoors.