How to cut stair stringers this old house?

If you are using a circular saw, make sure you have a guide and a dust collection system. If you are using a hand saw, then use a guide with a wide blade. A hand saw can also be used to cut the stringers but it’s harder work and the results are not as clean.

How to replace a stair stringers in this old house?

If you want to replace the existing stair stringers and still get the look you want, you’ll need to replace them with new ones. For new wood stringers, you can either buy them pre-cut to length and width or cut them to size yourself. If you’re doing the job yourself, then you’ll want to use a jigsaw or circular saw to cut them to width. To cut them to length, you can use a hand saw or a circular

How to replace stair stringers this old house?

Now that you have your stair stringers cut to the right length, you can install them with ease. You’ll want to measure the stair tread width and riser from the floor and mark the stringers. Fasten the stringers to the treads using galvanized screws. You may need to predrill the holes for the screws. Then, attach the new handrails to the stringers. Slip the handrails onto the stringers, but don’t tighten them

How to install wood stair stringers this old house?

The installation of wood stringers is pretty straightforward, but there are a few extra steps involved. Before you can install the stringers you’ll need to determine how wide each of the treads will be. Once you’ve made sure that all the treads are the same width it’s time to cut the stringers. To do this, you’ll need a circular saw with a miter gauge and a 2-stage sawing blade. Set the depth to

How to install stair stringers this old house?

Now, when it comes to installing the new treads, you’ll want to clamp the new stringers to the existing ones and secure them in place. You may need to use a pair of extra-long U-shaped clamping bars to span the gap between the two stringers. Now, you can add the treads and then secure the new stringers to the treads.