How to cut stickers on circuit explore air 2?

The circuit explore air 2 is a great small robot for kids. It is fun to play with and easy to control. The robot is equipped with a rechargeable battery and a remote control. The robot features two small wheels, a bumper, and two light emitting diodes (LEDs) that are used as sensors. The bumper can be moved depending on where the robot is placed. Thus, the robot is able to move around freely. The bumper also helps the robot to navigate when it is

How to cut stickers on Circuit Explore prime?

These circuit explore stickers can also be cut using a craft knife. This method is fast and easy but might result in a rougher cut. If you want to cut the stickers with a craft knife, you will need a fresh blade to prevent it from deforming. You can also use a craft knife to cut away the edges that stick up.

How to cut stickers on Circuit Explore air

Circuit Explore air has plenty of stickers on it, and many of them are rather small. Cutting them down to size is definitely an easy task. To do this, you'll need to use a single-edge razor blade and a small, flat, plastic cutting board. First, place the sticker on the board and use the blade to score the adhesive. After the score marks are made, slowly peel the paper backing away. You should now be able to lift up the sticker and place it back on

How to cut stickers on Circuit Explore

It is very easy to cut out the unnecessary parts of the sticker from the circuit board. In order to do this, you need a sharp knife with smooth edges, a toothpick or a small screwdriver to gently push the sticker off. You should cut the sticker from both sides so that you don’t leave any edges attached to the board.

How to cut stickers on circuit explore air prime?

To cut the circuit explore air & air prime stickers on the circuit explore air robot, you can use a sharp pair of craft scissors. First, cut the tape backing from the sticky tape. You can do this by either snipping it or pulling it off. Then, place the sticky tape over the area you wish to cover and press down firmly. You should use your hands to hold down the tape while you cut it. Be sure to cut slowly and carefully. Try not to snip off any