How to do a candle wax?

The first thing you need to do to do a candle wax is put a small container under your wax pool. This will catch the drips. The wax is very hot so it will form a solid mass as it cools, so don’t leave it on the hot wax and burn yourself! If you don’t have a container handy, use a small jar, pot or even Tupperware to catch the wax drips. What you don’t want is to have

How to do candle wax with wax melts?

Using a bowl and a pot, heat up some water until it is just boiling. After you have done this, add a few drops of soap to the water. Drop a piece of wax into the water and watch as the wax melts into the water. The soap helps to prevent the wax from hardening. You can also use butter or vegetable oil as a lubricant. Choose the color of wax you want, and then dip a metal or clay mold into the melted wax. Pour the wax into

How to make candle wax melts?

Before you start melting wax, you’ll need to chop it into smaller pieces. A butter knife is usually sufficient for this. You can also use a food processor or a sharp kitchen knife. You only need a few pieces to produce a good consistency. When you have chopped your wax, place it in a pot of water. The pot should be deep enough to cover the wax. When the water is boiling, turn down the heat to simmer. Keep the wax in the pot for about 20

How to make candle wax melts step by step?

In order to make candle wax melts, you need an empty jar, a pot of boiling water, a stainless steel or glass bowl, baking soda, vinegar, a tea strainer and some cotton balls. Put the jar in the pot of boiling water and add the baking soda and vinegar. Let the mixture stand for around 20 minutes and then strain the melted wax in the jar. Add the cotton balls and let them soak in the melted wax. Your homemade candle wax is ready to be used.

How to do candelit wax?

You can do candelit wax with a wax melting pot. Dip the wick in the melted wax and drag it to make a line on the candle. If you use a lot of wax, first press down the wick so that it’s flat. Don’t make the wick too thick or too thin. Once you’ve created your line, let the wax harden and then burn your candle.