How to drain a pool with the filter pump?

If you are using a filter pump to drain your pool you will need to determine how often it is draining. If you are draining your pool more than twice a week, check the filter pump for obvious issues, such as a clogged filter or a loose seal. If it isn’t obvious, you should call a professional to have the pump inspected. It could be having difficulty with water pressure.

How to drain a pool with a submersible pump?

A submersible pump is a great option when you need to drain a pool. This type of pump is typically installed beneath the pool water. It has a hose that’s threaded into a drain pipe and extends above the water line. You turn on the pump and it forces water through the hose to the pool’s drainage system. Because it’s usually not visible above ground, a submersible pump isn’t much of an eyesore.

How to drain a pool with a filter pump outlet?

The filter pump has a drain hose that connects to the pool’s main drain. Depending on the type of filter, it may have two or three hoses. If you have a sand filter, you’ll have two hoses, one for the filter and one for the skimmer. If you have a cartridge filter, you’ll have a single hose for both.

How to drain a swimming pool with a skimmer?

For small pools, a skimmer is usually all you need to drain the water. When your pool has lots of water in it, it’s automatically easier to drain, as less suction is needed to pull the water out. An added benefit of a skimmer is that it allows for the removal of the debris and leftovers that end up in your pool. A skimmer is usually fitted to a drain pipe close to the waterline. The skimmer has a basket that traps the

How to drain a filter on a pool?

If the filter pump is not working, then it is possible to drain the pool by hand. Simply, turn the filter off and then slowly pour about two inches of water out of the pool while simultaneously opening the drain. This method is slow and may take several hours to completely empty the pool. Once the water is drained, turn the filter back on and refit the filter cartridge and the pool should be ready to fill up again.