How to draw Iron Man mark 85 steps by step?

Now let’s find the correct angle for the arc the width of the line and the thickness of the line and start drawing the lines. As you can see, the line is a bit thicker at the bottom end, so draw half of the line, make it thinner towards the top end. Keep in mind that the width of the line should be slightly smaller than the diameter of the circle.

How to draw Iron man 85 steps?

The next step is sketching the figure. This is the easiest part, because you can pretty much use any figure drawing techniques you like, and the human body is easy to draw in any proportions. For the face, you can use the rectangle as a guide and fill it with the appropriate features. Next, add the arms and legs and the clothes. The whole thing should be drawn in line with the previous step, so it all flows together and resembles a single piece of art.

How to draw Iron man 75 steps by step?

The next design that you will need is the mark number 75. This is a step that is very similar to the one step mark from mark 65. The only difference is that this one has an arrow pointing down to it. This mark is drawn the same way except that the lines are thinner and the design is drawn on a flat surface. This step is not drawn on a grid. You can now use this step in the same way that you used the previous step.

How to draw Iron man mark 85 step by step?

The next step is to draw the three circles that make up the design. Begin by sketching two circles that are equidistant from each other. Connect the two circles using a line, with one end pointing towards the center of the circle you just drew. Add some detailing to the three circles by adding small triangles pointing towards the edges. Your Iron Man mark 85 is now complete!

How to draw Iron man mark 85 detailed steps?

Drawing the details of the mark is not that easy. It is a detailed sketch with a lot of curves, making it a challenge to draw. It is always best to first draw a simple sketch to get the right proportions. To draw this intricate design, use a T-shaped or triangular ruler. The straight lines of the T-shaped ruler can guide you in drawing the outer edges of the design.