How to find a window well drain?

Most window wells have a drain pipe leading down into the ground. When water is collected in the window well, it’s best to have your window well drain cleaned out. For older window wells, you may need to call a window well specialist for help.

How to find a window well drain cap?

A window well drain cap is a small metal plate that keeps water from entering the drain pipe from the window well. You’ll want to locate the drain pipe that goes down into the window well. From there, you’ll want to look for the cap on the end of the drain pipe. It should have an arrow pointing down towards the ground. If you’re not sure if you have the right drain pipe, you can use a magnet to look. A window well drain

How to find a window well drain connector?

You can easily locate the window well drain connector by using a plumber’s snake or a magnet. If you aren’t familiar with this tool yet or don’t have one handy, then you can watch YouTube videos and read some online guides on how to locate a window well drain connector. Once you find where the drain is located, you can connect the hose to it. Make sure that the hose is long enough to reach the ground. If it’s too short

How to find a window well drain cover?

There are a number of brands of window well drain covers. Some are made of plastic and some are made of aluminum. Aluminum drain covers are the most common, and they come in a variety of shapes and sizes. You can find them in the hardware store, or you can order them online. The important thing is to make sure the drain cover is the right fit for the window well. If it’s too small, water will pool in the well, and if it’s too

How to find a window well drain plug?

The first thing you need to do is locate the drain plug. It’s usually located on the inside of the wall near the window well. Once you locate the plug, you’ll want to loosen it slightly so that you can pull it out. You can loosen the drain plug by turning the screw that holds it in place in a clockwise motion. If the drain plug won’t budge, you’ll need to use a screwdriver to break the seal.