How to fix a toilet that doesn't flush right?

The flapper on the inside of your toilet is supposed to seal off the bowl from the pipes to prevent sewer gasses from making it through your pipes and into your home. If the flapper isn't sealing properly, the flushing action becomes less effective. You may notice a pungent odor when you try to flush. Your toilet may also leak water around the base.

How to fix a toilet that flushes half the time?

One of the most common issues with toilet is a partially clogged toilet that flushes half the time or not all. This issue, which is caused by a partial toilet seal or a partial clog, is relatively easy to fix. To address the issue, you will need to first determine what is causing the problem. Common toilet problems are usually caused by the toilet bowl or the flapper. When the flapper is partially dislodged, the water will be prevented from flowing towards the toilet bowl

How to fix a toilet that keeps flushing?

Many toilet flushes are caused by a malfunctioning flapper or fill valve. Remove the flapper or fill valve, and attach a new one. If the problem continues, it’s possible a toilet leak is causing a flushing issue. If so, check the flapper or fill valve for visible debris that could be stopping it from sealing properly. If the flapper or fill valve is visibly damaged, replace it immediately. If the flapper or fill valve appears to be properly sealed but

How to fix a toilet that flushes every time I press the button?

If you’ve checked out all of the above and your toilet still flushes every time you press the button, then it could be the flapper. This is quite simple to fix and only requires a few parts. A toilet flapper needs to be securely attached to the flange in which it is mounted. If not, it could fall off every time you flush. When you replace the toilet flapper, check to make sure it’s properly seated. If it’s

How to fix a toilet that won't flush?

The first thing that you will want to do is determine if the flapper is sticking. If the flapper is sticking, you will want to try to loosen it. Sometimes a piece of tape will be enough to remove the flapper and allow it to fall into place. If the flapper is not stuck, then it is likely the fill valve is broken. You can try taking the tank off the toilet to inspect it and try to find the broken piece. Do not attempt to fix the fill