How to fix a toilet that won't flush

How to fix a toilet that won't flush?

If your toilet won't flush at all, it could be because something is obstructing the flapper or the flapper is broken. First, try flushing. If that doesn’t work, you may need to remove the flapper. To do this, turn the handle clockwise to loosen the flapper. Then pull down on the flapper. Caulk around the flapper if you notice any cracks or warpage. Finally, replace the flapper and try flushing again

How to fix a toilet that won't flush water at all?

If you have a flapper and it still won’t flush you have a suspected clog. If the flapper is snapped off or damaged, you will need to replace it. If you have a ball float in the tank, it could be covered in wax or detergent. The wax and soap can form a sticky ball that causes the flapper to stick. The flapper can also be damaged if it is allowing water to leak into the tank. If you suspect that your fl

How to fix a toilet that won't flush water?

If your toilet won't flush all the way, the problem is not with the toilet itself, but rather with the tank. It can be caused by a clog, an empty flapper or a broken seal. You can check out our guide to toilet flappers to learn how to fix a toilet flapper that keeps stopping and your options for an inexpensive toilet flapper. If the flapper is fine, the problem could be with the fill valve. If you recently refinished or remodeled your

How to flush a toilet that won't flush water?

There are a few different things that could be causing your toilet to not flush properly. Often times, it’s because the flapper is partially or completely stuck in the down position. You can try to fix this issue by using toilet bowl cleaners or a toilet auger. If the flapper is in the up position, you could have a clog somewhere else in the drain. Try flushing your toilet again while you run a plunger down the drain. If you don’t

How to fix a garbage disposal that won't flush?

Garbage disposals are one of those things that are so simple when they work. It's not like there's a bunch of parts involved. Unfortunately, all too often, the garbage disposals in older homes have bad or broken parts that need to be repaired. If your garbage disposal won't turn on, but you've checked that the power is on, then you need to check the reset button. If the garbage disposal won't flush, it's possible that there is an obstruction in the drain