How to fix a toilet that won't flush all the way?

The flapper on your toilet may be sticking in the down position, causing your toilet to run and refuse to completely drain If the flapper is in the down position, you need to adjust the position of it so that it is in the up position. If the flapper is not in the down position, then you should first check for a crack or hole in the flapper. If you find no cracks, then you need to check the ballcock. If the ballcock is in good

How to fix a toilet that won't flush out?

If the problem is that your toilet won't flush all the way, it could be that the flapper is broken or that it's not sealing correctly. The flapper is the little piece of rubber or plastic that covers the drain when the toilet is in use. If the flapper isn't sealing properly, water will be able to leak around it and may even back up into your pipes. Flappers are easy to replace and can be found in most hardware or home improvement stores. If your fl

How to fix a toilet that won't flush all the way down?

Not flushing your toilet all the way down is more than just an annoyance, it could be an indicator that something is wrong with your toilet or with the pipes it connects to. An older toilet can be difficult to diagnose and can cause issues with other bathroom fixtures. You don’t want to flush your toilet but end up with a clogged drain or a flooded bathroom. Our plumbers can inspect your toilet and make sure it’s working properly. In addition, they can perform repairs

How to fix a toilet that won't flushes with water?

If your toilet is flushing fine but not refilling, it may be due to a clog somewhere in the drain pipe under the toilet. If you can hear water gurgling as you push down on the flapper, then you definitely have a clog and will need to call a plumber to check it out. A plumber can visually inspect the drain pipe to locate the clog and either clear it with a specialized tool or replace the drain pipe entirely (if it is damaged).

How to fix a toilet that won't flush?

If your bathroom won’t flush, it’s usually because something is wrong with the flapper. If the flapper is stuck in the down position, it won’t allow the water to pass. This often happens because of soap that has hardened on the flapper, which makes it stick to the down position. If this is the case, simply remove the flapper from the down position and turn it up. If the flapper won’t turn up, it