How to fix toilets that don't flush well?

If your toilet flushes slowly, and the water seems to go down the drain but does not reach the pipe, it's likely that there is a clog somewhere in the drain system. To check the entire length of the drain pipe, turn off the water at the main break in the pipe under the house and look down the drain with a flashlight. If you see any obstructions, remove them. You can also try plunging your toilet into the sink and pouring a bucket of boiling water down

How to fix toilets that flush out but not all water goes down?

If you consistently flush and nothing but a little bit of water comes out of your toilet, then there’s a good chance you’re dealing with a clogged toilet. Clogged toilets can be very frustrating, and it’s even more annoying when other family members are the ones who have to deal with the frustration, especially when it’s because of a clogged toilet! Fortunately, fixing a clogged toilet doesn’t have to be complicated at all. Most toilets

How to fix toilets that don't flush water?

The first thing you need to do is determine if the flapper is sealing properly. If you can see water dripping from the flapper, your toilet may be leaking internally. Try tightening the bolts securing the flapper to the bowl. If this does not resolve the problem, it is likely caused by a clog in your toilet. If this is the case, you may need to use a toilet flushing repair kit to clear the clog.

How to fix toilets that don't flush out water?

Toilets that leak or flush out only a small amount of water should not be a cause of major concern. If you suspect that you have a toilet that is flushing out less water than usual, try flushing the toilet for two minutes after using the water. If the water still doesn’t come out, you need to replace the flapper. The flapper is the part of the toilet that seals off the water tank when the water is turned off. Sometimes flappers get damaged

How to fix toilets that don't flush water or flush out?

If the toilet won't flush properly, first check that the flapper is in good condition. If it is, replace it. If not, try flushing and refitting it a second time. If this doesn’t work, you will need to flush again, but this time, add a little dish soap to the toilet bowl. You can also try adding two tablespoons of baking soda to the toilet bowl. But if the flapper is in good condition and still won’t fl