How to frame an exterior window opening?

The frame around your window can make your windows look shabby or outdated, so it’s important to spend some time making sure that your window frames are in good condition and both attractive and functional. If your windows are already in place, you can do some light touching up with paint or stain, or replace the existing hardware with new components that match your existing décor, but if you need to replace the existing windows, it’s best to hire a professional remodeler to take

How to frame a window with side open?

A window with a side open offers the homeowner greater access for cleaning. The window can be opened wider, too, giving more light into the room. The window shade can be adjusted to provide plenty of shade in the summer. The windows should be framed so the window box and the window itself are level.

How to frame a window opening a few inches?

If the existing casings are the right size, you can add a few inches to each side of the casings to create a proper window opening. You can add an inch or two at each end as well. If the casings are too small, you’ll need to replace them before adding windows. If the casings are too large, you’ll need to do some remodeling.

How to frame a window with one side open and one side closed?

This type of window framing is very easy to do yourself, as long as you have the right tools. If you have a jigsaw or circular saw, you can cut your own wood moldings and trim. If you don’t have the right tools, or don’t want to spend the money, you can buy pre-cut moldings and trim at a home improvement store.

How to frame a window with one open?

To create the appearance of a single-hung window with an open side, you’ll need to build an upper and lower window frame, and cover the gap between them with a single piece of molding. You’ll want to be sure to use molding that matches the color of the surrounding trim, and to install molding flanges to secure the molding to the window jam and the upper and lower window frames. Be sure to leave a small gap between the molding and