How to hem jeans professionally?
You may have tried the tried and true method of doing it yourself, but there’s nothing wrong with getting a little extra help! Finding a quality shop that can hem jeans professionally can be a lifesaver, especially if you end up with a hole in an important spot or if your jeans are too long.
How to hem jeans without sewing machine?
If you don’t have a sewing machine, you can use an old shirt. Cut a strip off the end of a shirt and measure it to fit the hemline of the jeans. Sew the two edges together with thread but leave the ends open. Turn the strip inside out and press the raw edges. Now you have a makeshift hem that you can use.
How to hem jeans on the bias?
Jeans that are “on the bias” are cut with the raw edge running diagonally across the leg. This gives the jeans a unique fit and feel that’s very flattering on most body types. The hemming process for these jeans is a little different than for regular jeans though. The first step is to mark the center of your jeans at the top of the rise. Next, you’ll want to mark the length you’d like the hem to be
How to hem jeans with needle and thread?
If you want to get a perfectly even hem on your jeans with just a sewing machine, using a double needle is the way to go. This method involves using two needles, one pointed and one round. When you approach the hem, thread the pointed end of the needle through the stitching along the edge of the jeans. Using a knotless tape measure, measure out the length of the hem you want. Then, feed the frame of the machine through the denim, aligning the pointed end of the
How to hem pants to fit?
Most people know that the hem on a pair of jeans should be a few inches longer than your actual leg length. But, did you know that the exact length of the hem is dependent on your leg length? If you have longer legs, then you should make the hem on your jeans longer; if you have shorter legs, then you should make the hem on your jeans shorter. Also, if you have a big stomach, a longer hem will make your jeans fit a little looser.