How to hem pants with tape?

If you have on a pair of pants that has a loose fit all over, you definitely don’t want to tape them. It can create a lumpy look or leave you with uneven hems. However, tape works perfectly for tapered pants or pants where you want to make sure the edges match up. Using the right type of tape and applying it correctly will make sure you end up with a hem that looks great.

How to hem skort with tape?

Look at the length of the skort s legs. You want to make sure that the hem is long enough to cover your shoes when you walk. Measure the length from the bottom of the skort to the top of the ankles, and add an extra two inches. Then, cut a piece of tape that’s the same length as the skirt. Fold the tape in half lengthwise, press it down on the edge of the skirt, and then press the tape down and over

How to hem pants with masking tape on the cuff?

Apply a small strip of tape to the edge of the hem line, making sure it’s even and matches the width of the pant leg. Fold the tape over so that it overlaps the cut edge by about 1/2-inch. Then press down firmly to adhere the tape to the fabric. Remove the paper backing and press the tape flat to create a clean, even fold. If you don’t want the tape to show through the hem, you can also use a strip

How to hem pants with duct tape?

To hem a pair of pants with duct tape, put the wrong side of the tape against the hem so that the sticky side is out. Run a small strip of tape along the length of the bottom of the hem, then press down firmly with your thumb to secure it in place. Use a small piece of tape to cover the sticky patch where the two ends of the tape meet.

How to hem pants with masking tape?

If you want to use masking tape to hem pants, you will need to cut a strip of tape slightly longer than the length of the pants you want to hem. If the tape is too long it will bunch up at the bottom of the pant leg and the seams will look uneven. To create a nice clean hem, make sure the ends of the tape are even and about a 1/2" long. Also, consider using clear tape. This tape will allow you to see the stitching that you