How to hem suit pants with tape?

Using a tape measure and a hem guide, mark where you want your hem to end. Then run the tape measure along the edge of the pants leg (not over the top). You can also place a ruler on the pants leg to ensure you are lining up the tape correctly. Once you’ve found your mark, mark it with a small chalk line. Now, you can either use a tape to secure the hem, or a special tape to attach the hem.

How to hem pants with tape for a shorter hem?

If you prefer a shorter hem on your pants, tape one side of the hem with the wrong side of tape facing out. Again, make sure you overlap the tape by at least two inches. Then, fold the tape over the raw edge of the hem. You want to press the tape into the edge of the pants to create a nice, flat fold.

How to hem jeans with tape for a shorter hem?

If you want to hem your jeans a few inches shorter without altering the leg length, tape both legs at the ankles. At the bottom, place a length of tape that will cover the entire hemline. Fold the excess over to the inside and press down. Use additional tape to secure the tape to itself and the hem.

How to hem pants with tape for a concealed hem?

While it’s possible to use clear tape to finish a pointed hem, the tape will often show through under certain lighting conditions. For a more professional look, you can use a tape that matches your fabric color. If the tape is thick, you may need to first apply a hem sealer before adding the tape.

How to hem pants with tape for a longer hem?

When you want to hem a pair of pants, using tape is a quick and easy way to get the perfect fit. However, if you want to create a longer hemline, you can use tape to accomplish this as well. To do this, cut a piece of tape slightly longer than the desired length of the hem.